Hence, this cable is compatible with the S9 Escape Auto, the S9 AutoSet, the S9 VPAP, the S9 VPAP ST, the S9 Elite and so forth.
#Resmed s9 battery overview series
This DC power cable works with all S9 series CPAP and Bi-Level machines and a number of S8 series machines as well. Importantly, this DC cable cannot be used to attach your device to a cigarette style power socket. The RPS II battery pack is able to fully recharge your machine in a very short period of time. Using the S9 DC power cable is remarkably easy: simply plug the cable in the back of your therapy machine and then connect the cable to the RPS II. This package includes the power cable only and does not come with the RPS II battery pack itself. The S9 series power cable is ideal for patients who travel frequently for business or pleasure. The S9 Series DC Power Cable by ResMed is a straightforward, easy to use cable which connects your S9 CPAP or Bi-Level machine to the ResMed Power Station II (RPS II). *after 500 cycles the battery shall recover at least 70% of its initial chargeĭimensions: 7.5 ” x 4.8″ x 0.ResMed Power Station II for S9 Series with DC Cable Quick Overview These steps also apply to the Stellar series. The steps in this section apply to the following ResMed products: S9, VPAP III, AutoSet CS2, VPAP Adapt series used with appropriate humidifiers (HumidAire 2i, H4i, or H5i only). Life Span: 500 charge/discharge cycles (100%-0% then back to 100%) The following overview describes selection of a deep-cycle battery suitable for operating your ResMed device for 8. Power Gauge: Digital display screen (shows charge level as a percentage) *charge time is per battery and based on using the ResMed Air 10 series or Freedom V² AC power supply It is not recommended to use this power supply on different electrical components or CPAP and Bi-Level Machines. The power supply (or power brick) is 90W with the end of the cable specific to the power input on the S9 Series. *battery capacity is reduced by 30% when operating between 23☏ to 32☏ The Power Supply is designed to ONLY work with the ResMed S9 Series of CPAP or VPAP machines.
Optimal Operating Conditions: 23☏ to 104☏ QC 3.0 USB Output Voltage: 5V | 2.4A (maximum) Output Voltage Range: 12V-24V DC (depending on DC output cable)Īverage Run Times: Single Battery: 1-3 nights | Dual Batteries: 3-5 nights For optimal battery performance you should disable or detach your humidifier and heated tubing.īiPAP/BiLevel devices will have lower run times as the pressure setting is not constant and changes throughout the night requiring more power to operate the device.Ĭell Type: Rechargeable lithium-ion (LG/Samsung ICR18650) Using heated humidification and/or heated tubing will significantly reduce expected run times by up to two thirds in most cases and in some cases could prevent the battery from being able to power your PAP device. This CP190-S9 power pack comes with a 192 Watt-hour super high capacity rechargeable lithium ion battery, an AC charger, and a special DC to DC power. Many factors can affect how long the Freedom V² CPAP Battery battery will power your PAP device, including, but not limited to the device type (CPAP, BiPAP, AVAP, VPAP, etc.) pressure setting, your mask fit, and the use of heated humidification or heated tubing.
#Resmed s9 battery overview portable
Need more power? You can bridge two Freedom V2 batteries together to double the amount of time you can power your CPAP machine or other portable electronic device. At just under 100 Wh it is FAA compliant for lithium-ion batteries taken in your carry-on baggage. The Freedom V2 CPAP Battery is ideal for powering your CPAP machine while enjoying your favorite outdoor adventures but it is also great for use during red-eye and international flights.
0 kommentar(er)
